High quality fast glue epoxy resin glue WPZA3 glue for woodworking woodplayer hobby use for wood crafts blocks combinate
Features
1. Good filling performance, epoxy resin, 100% solid content, good filling performance, the preferred type of adhesive for structural assembly.
2. Wide applicability, many choices, there are different products of light and dark color glue line, and different selections for summer and winter applications.
Application notes:
1. After the main agent and hardener are mixed, the exothermic reaction will produce high temperature and rapid hardening, and the more the blending amount, the faster the heat will be generated. Therefore, the maximum blending amount is limited to 1kg main agent and 1kg hardening agent each time. If too much, such as main agent 10kg+ When adding 10kg of hardener, the resin may burst due to high heat reaction, so please do not use too much at one time.
2. Always check and calibrate the temperature measuring device installed on the machine for temperature deviation. When the temperature exceeds 35℃, in order to extend the working time, the amount of B glue can be reduced by 10-20%, but it should not exceed this limit, or A glue is placed in a 5℃ refrigerator in advance to cool down, and then B glue is mixed, but the viscosity changes at low temperatures. Large and difficult to pour out.
3. Glue A and Glue B must be mixed completely and evenly. Even if only a small part of Glue A and B are mixed unevenly, it will still cause adhesion failure, especially in winter. Please make sure to mix well. It is recommended that the glue is mixed for 10 minutes Stir again afterwards.
4. Please select the most suitable type of glue based on factors such as ambient temperature, required use time and curing speed.
| WPZA3 Series |
| Commodity: | WPZA3 glue for woodworking woodplayer hobby use for wood crafts blocks combinate |
| The Amount Of Cloth Glue: | : 100-200 G/m2 |
| Pressurizing Pressure:: | 7.0-10.0 Kg/cm² For Low-density Materials, 9.0-12.0 Kg/cm² For Medium-density Materials, 12.0-17.0 Kg/cm² For High-density Materials |
| Pressing Time:: | The Ambient Temperature Is Above 25℃, And The Moisture Content Of The Material Is 8-14. It Is Recommended That The Pressing Time Be At Least 4 Hours, Preferably Overnight. |
| Shelf Life:: | 9 Months, Sealed And Packaged At 25°C. Store Sealed In A Clean, Cool And Dry Place With A Temperature Between 5-30°C. Use The One With The Longest Storage Time First. |
| Type:: | Liquid Glue, Wood Glue |
List of model parameters
| Product name | color | Characteristics and applicability |
| 901AB | Main agent milky white
Curing agent yellow | It is suitable for general structural assembly of various red and white wood materials, with good filling and bonding strength. For operating temperature above 20℃, summer type (S) is recommended; for operating temperature below 20℃, winter type (W) is recommended. |
| 902AB | Main agent milky white
Curing agent yellow | It is suitable for high-requirement structural assembly of various red and white wood materials, with higher bonding strength and faster curing speed. For operating temperature above 20℃, summer type (S) is recommended; for operating temperature below 20℃, winter type (W) is recommended. |
| 960AB | Main agent off-white
Curing agent yellowish | It is suitable for general structural assembly of various white wood materials, with good filling and good bonding strength. For operating temperature above 20℃, summer type (S) is recommended; for operating temperature below 20℃, winter type (W) is recommended. |
| 908AB | Transparent main agent
Curing agent yellow | Suitable for high-demand structural assembly of various red and white wood materials, with good bonding strength and applicability. For operating temperature above 20℃, summer type (S) is recommended; for operating temperature below 20℃, winter type (W) is recommended. |
Product Tags:
|
|
100% Solid Content Epoxy Resin Woodworking Glue Wide Applicability Images
|
